High-Performance Industrial, Maritime & Municipal LED Lighting Solutions Engineered for the Smart Grid and Sustainable Infrastructure of Catalonia.
Premium outdoor luminaires configured with high-purity optical systems specifically tailored to maritime, smart-city, and architectural frameworks across Catalonia.
As one of Southern Europe’s leading technological and industrial epicenters, Barcelona is currently executing a paradigm shift in municipal efficiency and eco-preservation. From the expansive industrial infrastructure of Zona Franca to the high-throughput logistics terminals at the Port of Barcelona, lighting is no longer just about visibility—it is a critical driver of decarbonization, digital transformation, and systemic safety. Operating under strict Spanish and Catalan environmental statutes (such as the Catalan Law 6/2001 on the Prevention of Light Pollution), modern lighting retrofits demand uncompromising control over luminous distribution, zero upward light output (ULOR = 0%), and precise color temperature tuning to safeguard the regional nocturnal environment.
Selecting the right LED floodlight manufacturer for projects within Barcelona requires deep alignment with European Normative standards, specifically UNE-EN 13201 (for road and pathway requirements) and the regional guidelines enforced by the Generalitat de Catalunya. Our high-mast and architectural floodlights are engineered with asymmetric optical lenses and internal baffles. This precise engineering confines light projection to targeted target grids, eliminating light spill into adjacent residential zones and minimizing sky glow over the Mediterranean coast. Our fixtures support warm CCT configurations (2700K to 3000K, and specialized amber wavelengths) that comply with ecological requirements for marine borders and protected zones, while delivering optimal visibility for industrial yards, container docks, and rail junctions.
In accordance with Barcelona's Smart City initiatives, modern illumination must interface seamlessly with advanced telemetry. By integrating smart dimming protocols (0-10V, DALI-2) and standardized NEMA/Zhaga receptacles into our LED floodlight assemblies, we enable local utility operators to execute automated dimming schedules, monitor load distribution in real-time, and run predictive maintenance analytics. This integration reduces municipal energy consumption by up to 70% compared to legacy high-pressure sodium (HPS) and metal halide fixtures, assisting metropolitan operators in achieving localized carbon-neutral targets while mitigating operational expenditures.
Multi-layered PMMA lenses engineered for asymmetric beam profiles. Ensures zero upward light waste (ULOR 0%) and minimizes glare index (UGR) for roadways and industrial platforms.
ADC12 grade die-cast aluminum heat sinks featuring streamlined airflow channels. Reduces junction temperatures, ensuring an L90 lifetime exceeding 100,000 operational hours.
Pre-configured with standard Zhaga Book 18 or NEMA 7-pin interfaces to easily support wireless photocells, smart motion sensors, and LoRaWAN/NB-IoT city integrations.
In B2B industrial procurement, supply chain resilience, production capacity, and manufacturing transparency are as critical as product specifications. Yangzhou OneAll Lights Co., Ltd. serves as a reliable manufacturing partner for European engineering firms, distributors, and municipal contractors. Established in 2003, our production facility features over two decades of engineering expertise, coupled with substantial capital investments in state-of-the-art machinery. This allows us to maintain strict quality control and minimize lead times for international shipping to major maritime hubs like the Port of Barcelona.
Operating a vertically integrated facility ensures that every stage of production—from the initial raw aluminum casting to SMT component positioning, automated gluing, and robotic wave soldering—conforms to ISO9001 and ISO14001 guidelines. Our manufacturing floor utilizes CNC bending machines, automated submerged arc welding systems, high-precision laser cutters, and electrostatic powder coating lines. By managing these processes internally, we control structural tolerance, thermal dissipation, and corrosion-resistant finishes. This level of quality control is essential for fixtures deployed in marine environments like the Mediterranean coast, where salt air accelerate degradation.
Our engineering laboratory conducts comprehensive quality audits to qualify fixtures for demanding outdoor conditions. This includes salt spray testing (complying with ASTM B117) to verify corrosion resistance in marine environments, water ingress tests (ensuring IP66 to IP68 compliance), and IK08/IK10 mechanical impact testing to guarantee protection against vandalism and high-impact physical loads. Every production batch undergoes a 100% automated 24-hour high-voltage aging test to eliminate infant mortality rates prior to packing. By providing full CE, CQC, CCC, and CB documentation, we ensure smooth customs clearance and regulatory compliance for municipal tenders throughout the European Union.
Examine our full lineup of high-wattage, marine-grade, and solar-integrated LED floodlights designed for Barcelona's infrastructure networks.
Industrial projects in proximity to the Mediterranean basin face complex ambient environmental challenges. High humidity levels, combined with elevated sodium chloride concentrations in the marine air, accelerate galvanic corrosion on standard metallic surfaces. To address these demands, our engineering department has developed specialized protection systems for all floodlights deployed in coastal environments.
Our factory processes housing surfaces using a multi-step pretreatment process before applying electrostatic powder coating. The bare ADC12 die-cast aluminum undergoes a chromate-free conversion pretreatment to improve adhesion and provide an initial layer of oxide protection. Following this, we apply a high-performance fluorocarbon protective coat. This multi-layered barrier protects the underlying alloy from salt fog ingress, resisting blistering, chalking, and paint peeling in marine environments.
Internally, the sensitive driver electronics and SMT circuit boards receive an automated, high-precision three-proof coating (conformal coating). This hydrophobic polymer layer seals components against moisture, salt spray, and atmospheric dust. This prevents micro-short circuits and dendritic growth on components, extending the MTBF (Mean Time Between Failures) of the entire luminaire.
High summer temperatures in southern Europe can compromise luminaire performance if heat dissipation is insufficient. Our thermal designs feature vertical cooling fins that utilize convective airflow. This structure prevents dust accumulation and maximizes surface area for heat exchange. Keeping the junction temperature of the Lumileds or Osram chips below 85°C prevents thermal degradation. This guarantees color consistency (SDCM < 3) and preserves the design lifetime of the luminaire.
Get answers to common technical, compliance, and logistical questions about installing and deploying LED floodlights in Barcelona and European markets.
Our luminaires are engineered to achieve a ULOR (Upward Light Output Ratio) of 0%. We utilize asymmetric optical distribution lenses to direct luminous flux precisely to the target surface. We also support warm color temperatures (2700K to 3000K) and specialized amber spectral profiles, complying with local regulations regarding sky glow prevention and nocturnal protection.
We apply a multi-layered surface treatment, starting with a chromate-free conversion pretreatment, followed by an electrostatic fluorocarbon powder coating. Critical internal electronics, including PCBs and driver connections, receive an automated conformal coating to seal components against moisture and salt-fog degradation.
Yes. Our industrial floodlights can be equipped with standardized DALI-2 drivers and Zhaga Book 18 or NEMA 7-pin receptacles. This allows integration with municipal control platforms, photocells, motion sensors, and central management systems utilizing communication protocols like LoRaWAN.
Our production facility operates under ISO9001 and ISO14001 quality and environmental management systems. The floodlight ranges carry complete CE compliance certificates for both Low Voltage (LVD) and Electromagnetic Compatibility (EMC) Directives, along with RoHS and ENEC test reports for European municipal and industrial markets.
Standard production lead times range from 15 to 25 days depending on the project volume and customization needs. We arrange sea freight dispatches from Shanghai or Ningbo ports directly to the Port of Barcelona. For urgent infrastructure requirements, we also support combined rail or air freight options.
Yes. Our engineering department uses DIALux modeling to simulate photometrics and calculate lighting layouts based on your project files. We can customize beam angles and optical profiles (from narrow 2° searchlight spots to broad 120° flood distributions) to achieve target lux levels and uniformity ratios.
OneAll Lights